Kitchen Faucet Repair
There are various types of kitchen faucets, but the plumbing basics of removing, cleaning, and reinstalling the faucet remains the same. The problem of a leaky or noisy kitchen faucet repair is faced, when either the parts of the faucet are completely corroded, too old or if they are very dirty.
How to Repair Kitchen Faucet
Here are the three most commonly faced problems of kitchen faucet repair and solutions to them.
Put a rag in the drain, to avoid slipping of any part down the drain, and turn off the water. Inside most faucets you will find a small screen, which is present at the end of the spout, from which the water comes out. If the problem occurs due to a dirty screen, then you might need some basic kitchen cleaning. Take out the spout by unscrewing it, and then use a toothbrush to clean the screen to get rid of any blockage. Then take out the screen, and let it soak in a solution of warm water and vinegar for an hour.
Fixing the Cartilage
In many cartilage type of faucets, the problem could be due to a corroded or dirty cartilage. Turn off the water, and put a rag in the drain. Remove the faucet head, and keep the parts in order, so that it is easy to place them back in their original places. For kitchen faucet removal of the spout, you will have to unscrew the screws underneath it, then pop out the faucet head using a knife or nail filer. Underneath this, you will see a long cylindrical object, which is the cartilage. Take it out and examine it. Check whether it can be cleaned and fixed back, or is beyond repair and needs to be replaced with a new one.
Sometimes the problem could be occurring due clogs in the pipe which is attached to your kitchen faucet. Turn off the water, and keep a drag in the drain. Then remove the kitchen faucet head and arrange the parts in the order that you will have to reinstall them. Then use a plumbing snake, which can be found at any hardware store. Feed the snake slowly down the pipe to unclog the pipe, turn the snake around if you find any obstruction.
These were some of the common kitchen faucet repair solutions. However, the removal of the faucet heads might differ, as there are different kinds of faucets used for kitchen. But the basic of kitchen faucet repair remains the same which is to remove the parts, and check for dirty or corroded parts, clean them or replace them with new parts, and reinstall the faucet.
more imformation:-appliance service